Make a path
of your own.

Premium Concrete Paver Moulds & Accessories for DIY & Professional Use

Plan a garden path, patio or stepping-stone project with reusable concrete moulds and laying tools. Vehicle-bearing surfaces require a suitable engineered design and base.

Choose a shape, check its dimensions, and allow time for ground preparation, pouring and curing. Your finished result depends on the mix, base and workmanship.

Browse our collection today & start building your dream outdoor space!

Fast shipping direct to your door all across Canada

Paver Moulds

Accessories

Welcome To Concrete Mould Company Canada

If you are looking for a cost effective way to create a garden walkway, stepping stones or patio area .... we have the solution.

EASY DIY PROJECT

Super practical garden concrete mould that will help you create a sensational walkway or patio area easily and quickly

HEAVY DUTY & REUSABLE

The moulds can be cleaned and reused. Materials and release timing vary by shape and concrete mix; check the individual product specifications and the mix supplier’s instructions.

PERSONALIZE YOUR OUTDOOR SPACE

Improve the appearance of your outdoor space with beautifully created landscaped walk ways and path ways and patio areas without the huge expense of employing trades people

Does it cost a lot to make your own concrete pavers?

If you are already looking into either adding or replacing your patio, driveway, or walkway, you have probably already encountered the plethora of options available in the world of paving materials, all of which have different levels of durability and require different kinds of maintenance.

Depending on what you need, all of these options have different advantages and disadvantages.

Cement pavers, for example, look great and come in a variety of shapes and sizes so that you can greatly enhance the overall look of your yard or garden. The downside to these pre-made pavers, however, is that they are quite expensive, and will add up very quickly if you need to buy a large or even moderate number of stones.

But did you know that you can make your own concrete pavers for a fraction of the cost, and that it is not even all that difficult?

Most hardware stores will carry moulds for making cement pavers, but if you prefer you can make your own moulds out of plywood.

Release time depends on the mould and concrete mix. Open garden-path forms and enclosed casting moulds work differently. Follow the mix supplier’s release and curing instructions; concrete needs protection while it gains strength.

If you are happy to work on your project slowly and a little bit at a time, then being able to produce 10-20 pavers at a time might be enough.

Compare the full project cost

Include the mould, concrete, base material, delivery, tools and your time when comparing DIY pavers with ready-made paving. Larger projects may spread the mould cost over more pours, but savings depend on local prices and the finished design.

An earlier project example on this site quoted $1.00–$1.52 for material for two pavers, a $3.97 ready-made paver, a $15 mould and a discounted 80 lb bag at $2.50. These are historical examples, not current Canadian prices or promised savings. Get current local quotes and use concrete suitable for the job.

Concrete Paver mould & Cement Paver moulds: Your Complete Guide to DIY Paths, Patios, and Garden Stepping Stones

Ready to build a gorgeous path or patio without hiring a crew? With the right Concrete Paver mould, you can pour professional-looking pavers right at home, on your schedule and at your pace. This guide walks you through everything you need to know about Cement Paver moulds and Concrete Stepping Stone moulds, from choosing shapes and sizes to mixing concrete, demolding, curing, sealing, and long-term maintenance. Let’s turn that blank outdoor space into something beautiful, one mould at a time.

Why Choose Concrete Paver moulds?

Think of moulds as your paver “printer.” They give you consistent shapes, crisp edges, and design freedom you simply can’t get with store-bought stones. You control the mix, the color, the texture, and the pattern. Plus, when the mould pays for itself after a few pours, you can keep creating matching pavers for borders, fire pit circles, or surprise design upgrades later on.

Benefits at a Glance

• Customization: Pick your color, texture additive, and stone style.
• Consistency: Each pour matches the last, so your layout looks cohesive.
• Scalability: Start small with a walkway; expand to a patio or driveway edging.
• Durability: With proper curing and sealing, molded pavers stand up to weather and foot traffic.
• Creative Fun: It’s part craft project, part construction, and totally satisfying.

Meet the Family: mould Types & What They’re Best For

Not all moulds are created equal. Here’s how to match the Concrete Paver mould to your project vision.

Interlocking Cement Paver moulds

Interlocking designs click together like puzzle pieces, keeping lines straight and gaps tight. They’re ideal for patios and paths where you want a tidy, geometric look with superior stability.

Random Stone Pattern moulds

Prefer a natural, hand-laid vibe? Random stone patterns mimic the organic shapes you see in flagstone paths. They’re great for garden trails, side yards, and cottage-style patios.

Concrete Stepping Stone moulds

Simple, round or square stepping stones are perfect for quick wins: a path across a lawn, access to raised beds, or a playful hop-stone trail for kids. These Concrete Stepping Stone moulds pour fast and demold easily.

Border & Edging moulds

Create clean transitions between lawn and mulch beds or define your patio’s perimeter. Edging moulds help keep gravel and soil in place while framing your main pavers.

Specialty Texture & Stamped moulds

Some moulds feature wood-grain, slate, or brick textures right in the form. Add integral color or a light antique wash after curing for insanely realistic finishes.

Choosing the Right mould Material: Plastic vs. Polyurethane vs. Silicone

Material matters. It affects durability, flexibility, and how easy it is to release the paver.

High-Density Plastic (HDP)

Pros: Affordable, lightweight, quick to clean. Best for: Straight lines, interlocking patterns, beginners. Consider: Not as flexible as silicone, use a release agent for smoother demolding.

Polyurethane moulds

Pros: Durable with a bit of flex; handles detailed textures well. Best for: Repeated use, textured surfaces. Consider: Slightly heavier; store flat to maintain shape.

Silicone moulds

Pros: Superb release, fantastic for intricate shapes. Best for: Stepping stones, specialty designs, high detail. Consider: Typically higher initial cost but excellent demold performance.

Project Planning: Layout, Quantity & Pattern

A little planning goes a long way. Sketch the area, measure total square footage, then select your paver size. Divide area by the coverage of one mould pour to estimate how many pours you’ll need. If you want to speed things up, consider using two or three identical moulds at once so you can leapfrog pours as they cure.

Popular Layout Patterns

• Running Bond: Simple, classic, easy to install.
• Herringbone: Strong and eye-catching, great for paths with curves.
• Random Stone: Organic, less strict alignment, hides small errors well.
• Basket Weave: Charming old-world look for patios and courtyards.

What You’ll Need: Tools & Materials Checklist

Before you pour your first paver, gather your essentials:

• Selected Concrete Paver mould, Cement Paver moulds, or Concrete Stepping Stone moulds
• Concrete mix (standard or high-strength); optional polymeric additives
• Integral color or mineral pigments (optional)
• Release agent (spray oil, mould release, or light cooking spray)
• Trowel, margin trowel, float, and concrete edger (optional)
• Wheelbarrow, mixing tub, or concrete mixer
• Measuring bucket and water source
• Rubber mallet (for settling moulds)
• Level, tape measure, string line
• Compactor or hand tamper (for base prep)
• Gravel base and sand leveling layer
• Gloves, eye protection, and dust mask

Base Prep 101: The Secret to Long-Lasting Pavers

Even the best paver looks bad if the base is wrong. Carve out the area to a depth that accommodates your paver thickness plus a compacted gravel base (typically 3-4 in / 7-10 cm) and a thin sand leveling layer. Compact the gravel in 2-inch lifts, then screed the sand smooth. A flat, well-drained base prevents settling and frost heave.

Drainage Tips

• Pitch the surface away from structures (about 1/8-1/4 inch per foot).
• Use landscape fabric under gravel to limit weed growth and soil migration.
• In rainy climates, consider a French drain or permeable joint sand.

How to Use Your Cement Paver moulds: Step-by-Step

Time to pour! Follow these steps for pro-level results on day one.

1) Prep the mould

Clean and dry the mould. Lightly coat with a release agent, especially for detailed textures or new moulds. Set the mould on your leveled, compacted sand or on a flat worktable if you’re casting offsite.

2) Mix the Concrete

Follow the bag instructions. Aim for a consistency like thick oatmeal: wet enough to flow into corners, dry enough to hold shape when demolded. Add integral pigment now if you’re coloring the entire paver.

3) Fill the mould

Shovel or pour the mix into the mould, slightly overfilling. Use a trowel to work concrete into edges and textures. Tap the sides of the mould or use a rubber mallet to vibrate out air bubbles.

4) Screed & Smooth

Level the surface with a straight board or trowel. If you want a beveled edge, run an edger along the perimeter. For a non-slip texture, finish with a light brush stroke after initial set.

5) Initial Set & Demold

Allow the concrete to firm up until the surface dulls and fingerprints don’t sink deeply. Carefully lift the mould straight up. If it sticks, gently flex (silicone/PU) or tap the sides (plastic). Move the mould forward and repeat.

6) Cure Properly

Curing is where the magic happens. Keep fresh pavers lightly misted or covered with plastic for at least 24-48 hours, then let them continue curing for several days. The longer the cure, the stronger the paver.

Pro Tips for Stunning Results

Color Like a Pro

• Integral Color: Mix pigment into the batch for through-body color.
• Antique Wash: After curing, wipe diluted pigment into crevices, then seal.
• Dry-Shake Hardeners: For advanced users, broadcast on fresh concrete for a dense, colored surface.

Texture & Detail

• Add fine aggregate for subtle grip and stone-like texture.
• Lightly roll a texture mat over the surface (before final set) for extra realism.
• Embed leaves, shells, or pebbles in stepping stones for custom art.

Strength & Longevity

• Use a high-strength mix or add reinforcing fibers for heavy-traffic zones.
• Keep edges supported with a border or curb to prevent lateral movement.
• Seal pavers once they’re fully cured to resist stains, algae, and UV fade.

Installation Options: Cast-In-Place vs. Off-Site Casting

You can mould pavers directly in the final location (fast layout, instant gratification) or cast them separately and install later (more control, batch quality). Both work, pick the method that suits your schedule and space.

Cast-In-Place

Set the mould on your prepared base, pour, lift, and move on. Great for long paths and consistent spacing. Just keep your base perfectly level as you go.

Off-Site Casting

Use a flat table, pour in batches, and cure indoors or under cover. When ready, set pavers on a prepared base with a thin sand bed. This method is ideal for colored or specialty pieces.

Sealing, Jointing & Finishing Touches

Once pavers have fully cured, sweep fine sand into joints or use polymeric joint sand for better weed resistance. Apply a suitable concrete sealer for enhanced color, stain resistance, and easier cleaning. Choose matte for a natural stone look or gloss for a wet-stone sheen.

Edging for Stability

Install paver edging (plastic, metal, or poured border) to lock the field in place. A stable edge keeps everything tight through seasons and traffic.

Maintenance: Keep Your Patio Looking Fresh

Concrete is tough, but a little love goes a long way.

Routine Care

• Blow off leaves and debris to prevent staining.
• Spot clean with mild detergent; pressure wash gently if needed.
• Reapply sealer according to the product schedule for ongoing protection.

Weed & Moss Control

Polymeric sand helps, but if weeds pop up, remove them before they root deeply. For mossy, shaded areas, improve drainage and sunlight exposure or use a concrete-safe cleaner.

Design Ideas to Spark Your Imagination

Stuck on style? Try these combinations and themes:

Modern Minimal

Use large rectangular Cement Paver moulds in cool gray with tight joints. Add a matte sealer for a smooth, architectural finish.

Rustic Cottage

Choose random stone moulds, warm integral color, and a soft antique wash. Plant creeping thyme in wider joints for a fairy-tale path.

Zen Garden

Round Concrete Stepping Stone moulds with natural pebbles embedded on top. Space them through raked gravel for a calm, contemplative walkway.

Entertainer’s Patio

Interlocking pavers in a herringbone layout with a contrasting border. Add string lights and planters to finish the look.

Frequently Asked Questions

How many pours will I need for a small patio?

Calculate your patio’s square footage and divide by the coverage of one mould pour. If your mould covers 2 sq ft and your patio is 120 sq ft, you’ll need about 60 pours. Using multiple moulds in rotation speeds up the process.

Can I color my pavers?

Absolutely. Add integral pigment to the mix for solid color, or apply a color wash after curing for depth and variation.

Do I need rebar or mesh?

For standard walkways, a high-quality mix is enough. For driveways or heavy loads, consider fibers or light wire reinforcement, and ensure an excellent base.

How long before I can walk on them?

Light foot traffic is often okay after initial curing (check your mix guidelines), but full strength takes longer. Let them cure thoroughly before placing heavy furniture or planters.

Will the moulds wear out?

With proper care and release agents, quality moulds handle many cycles. Clean after each use and store flat away from direct sun to extend life.

Buying Guide: What to Look for in a Concrete Paver mould

When you’re shopping, keep these criteria in mind:

1) Shape & Size Variety

Do you want square tiles, rectangles, natural stone patterns, or statement stepping stones? Match the mould style to your layout goals and yard scale.

2) Material Quality

Look for heavy-duty plastics, polyurethane, or thick silicone that resists warping and delivers clean edges.

3) Release Performance

Fine textures demand a mould that releases easily. Silicone excels here; plastic with a light release agent also performs well.

4) Reusability & Care

Check cleaning instructions and storage recommendations. moulds with reinforced ribs or thicker walls tend to last longer.

5) Compatibility With Additives

If you plan to use pigments, fibers, or surface hardeners, choose mould materials known to play nicely with enhanced mixes.

Safety First: Smart, Simple Precautions

Concrete work is straightforward, but protect yourself:

• Wear gloves and eye protection, especially when mixing and pouring.
• Use a dust mask when handling dry mix and pigments.
• Lift moulds and bags safely; use a wheelbarrow for heavier loads.

Troubleshooting Common Issues

Pavers Sticking to the mould

Use a proper release agent, ensure the mould is clean, and let the concrete reach a firm initial set before lifting.

Surface Bubbles or Pinholes

Tap or vibrate the mould after filling to release trapped air. Slightly wetter mixes often flow into details better.

Cracking

Cracking typically points to a weak base, rushed curing, or mixes that are too dry. Reinforce edges and follow a steady curing routine.

Uneven Joints

Check your base level often and use spacers or string lines to maintain consistent gaps, especially with interlocking moulds.

Going the Extra Mile: Advanced Techniques

Two-Tone & Veining Effects

Drop a contrasting pigment into the top surface and swirl with a trowel to mimic natural stone veining.

Inlays & Embedded Accents

Press decorative stones, glass beads, or metal medallions into the surface before final set. Seal thoroughly once cured.

Permeable Joints

Use larger joints filled with decorative gravel or permeable joint sand to promote drainage and reduce runoff.

Why Our moulds?

We obsess over the little things so your project looks anything but “DIY.” Crisp edges, smart ribbing for rigidity, clean release, and a wide range of sizes and styles, our Concrete Paver mould lineup helps you build a space you’ll be proud of. Whether you’re laying a modern patio, carving a woodland path, or crafting whimsical stepping stones, you’ll find the perfect fit here.

What Sets Our Cement Paver moulds Apart

• Reliable Consistency: Repeatable results pour after pour.
• Design Breadth: From interlocking geometric sets to natural stone patterns.
• Ease of Use: Beginner-friendly with pro-level finishes.
• Care & Support: Clear instructions and tips for long-lasting moulds.

Quick Start: Your First Weekend Project

Want an easy win? Try this two-day stepping-stone path using our Concrete Stepping Stone moulds.

Day 1

1. Plan your path with a garden hose as a guide.
2. Scoop shallow footprints for each stone and compact the soil.
3. Mix concrete, add integral color if you like, and pour into moulds placed on a flat board.
4. Tap out bubbles, smooth the top, and demold once set. Keep covered to begin curing.

Day 2

1. Bed each stone on a thin layer of sand so the tops sit just above ground level.
2. Check spacing and level as you go.
3. Backfill around each stone, tamp lightly, and admire your new path.

Eco-Conscious Tips

Concrete is long-lasting by design. To make your project even greener:

• Use local aggregates to reduce transport footprint.
• Choose permeable joints to support groundwater recharge.
• Build once, maintain well, longevity is sustainability.

Care & Storage for Long mould Life

Rinse moulds after each session. Avoid harsh scrubbing tools that can scuff detailed textures. Dry fully and store flat in a cool, shaded place. A little care now means many more pours later.

Customer-Style Use Cases

The Weekend Warrior

Build a 30-foot garden path with a single random stone mould in two weekends. Start with the walkway, then add a matching patio border later.

The Design Tinkerer

Batch-cast pavers in multiple natural tones. Mix and match for a subtle mosaic effect that looks custom, because it is.

The Family Project

Keep children away from wet concrete and mixing. Adults can add dates or decorative marks with suitable tools and protective equipment. Seal them to preserve those memories for years.

Before You Pour: Quick Checklist

• Base excavated, gravel compacted, sand screeded?
• moulds clean, dry, and lightly coated with release?
• Concrete mixed to the right consistency?
• Color, textures, and edges planned?
• Moist curing schedule in mind? (Cover or mist for strength.)

Get Started Today

Browse our collection of Concrete Paver mould styles, including interlocking Cement Paver moulds and decorative Concrete Stepping Stone moulds. Pick your pattern, grab a bag of mix, and pour your first stone. That dream patio or winding garden path? It’s closer than you think.

Conclusion: Build Spaces You Love, One mould at a Time

Outdoor projects don’t need to be complicated to look incredible. With quality moulds, a solid base, and a bit of creativity, you can craft paths, patios, and stepping stones that feel custom, because you made them. Choose the right Concrete Paver mould, follow the steps above, and enjoy a space that’s as durable as it is beautiful. Ready to start? Your next favorite spot in the yard is waiting.